FPGA-in-the-Loop-Simulations for Dynamically Reconfigurable Applications

Paiz C, Pohl C, Radkowski R, Hagemeyer J, Porrmann M, Rückert U (2009)
In: Proceedings of the 2009 International Conference on Field-Programmable Technology (FPT'09). IEEE Circuits and Systems Society, IEEE Electron Devices Society, Institute of Electrical and Electronics Engineers (Eds); The University of New South Wales, Sydney, Australia, 9-11, Sydney, Australia: IEEE: 372-375.

Konferenzbeitrag | Veröffentlicht | Englisch
 
Download
Es wurden keine Dateien hochgeladen. Nur Publikationsnachweis!
Autor*in
Paiz, Carlos; Pohl, Christopher; Radkowski, Rafael; Hagemeyer, JensUniBi; Porrmann, MarioUniBi ; Rückert, UlrichUniBi
herausgebende Körperschaft
IEEE Circuits and Systems Society; IEEE Electron Devices Society; Institute of Electrical and Electronics Engineers
Abstract / Bemerkung
This contribution presents a Hardware-in-the-Loop (HiL) design environment for FPGA-based systems. The presented tool-flow supports a two-stage verification process: A cycle-accurate HiL simulation using well-known simulation tools such as MATLAB/Simulink or Modelsim, and a real-time test using the target environment of the Design Under Test (DUT). The first stage allows an early verification of the DUT using a simulated environment, while the focus of the second stage is on monitoring internal states and I/Os of the DUT in operation, and on adjusting design parameters. All hardware and software interfaces required for both stages are generated individually and automatically by our tool-flow. The demo shows the benefits of using the presented HiL framework for applications targeting dynamic hardware reconfiguration. As an example, a twocontroller system for an inverted pendulum is presented, where either a real system or an FPGA-based model combined with an augmented reality 3D animation can be used.
Erscheinungsjahr
2009
Titel des Konferenzbandes
Proceedings of the 2009 International Conference on Field-Programmable Technology (FPT'09)
Seite(n)
372-375
ISBN
9781424443758
Page URI
https://pub.uni-bielefeld.de/record/2144891

Zitieren

Paiz C, Pohl C, Radkowski R, Hagemeyer J, Porrmann M, Rückert U. FPGA-in-the-Loop-Simulations for Dynamically Reconfigurable Applications. In: IEEE Circuits and Systems Society, IEEE Electron Devices Society, Institute of Electrical and Electronics Engineers, eds. Proceedings of the 2009 International Conference on Field-Programmable Technology (FPT'09). The University of New South Wales, Sydney, Australia, 9-11, Sydney, Australia: IEEE; 2009: 372-375.
Paiz, C., Pohl, C., Radkowski, R., Hagemeyer, J., Porrmann, M., & Rückert, U. (2009). FPGA-in-the-Loop-Simulations for Dynamically Reconfigurable Applications. In IEEE Circuits and Systems Society, IEEE Electron Devices Society, & Institute of Electrical and Electronics Engineers (Eds.), Proceedings of the 2009 International Conference on Field-Programmable Technology (FPT'09) (pp. 372-375). The University of New South Wales, Sydney, Australia, 9-11, Sydney, Australia: IEEE. https://doi.org/10.1109/FPT.2009.5377612
Paiz, Carlos, Pohl, Christopher, Radkowski, Rafael, Hagemeyer, Jens, Porrmann, Mario, and Rückert, Ulrich. 2009. “FPGA-in-the-Loop-Simulations for Dynamically Reconfigurable Applications”. In Proceedings of the 2009 International Conference on Field-Programmable Technology (FPT'09), ed. IEEE Circuits and Systems Society, IEEE Electron Devices Society, and Institute of Electrical and Electronics Engineers, 372-375. The University of New South Wales, Sydney, Australia, 9-11, Sydney, Australia: IEEE.
Paiz, C., Pohl, C., Radkowski, R., Hagemeyer, J., Porrmann, M., and Rückert, U. (2009). “FPGA-in-the-Loop-Simulations for Dynamically Reconfigurable Applications” in Proceedings of the 2009 International Conference on Field-Programmable Technology (FPT'09), IEEE Circuits and Systems Society, IEEE Electron Devices Society, and Institute of Electrical and Electronics Engineers eds. (The University of New South Wales, Sydney, Australia, 9-11, Sydney, Australia: IEEE), 372-375.
Paiz, C., et al., 2009. FPGA-in-the-Loop-Simulations for Dynamically Reconfigurable Applications. In IEEE Circuits and Systems Society, IEEE Electron Devices Society, & Institute of Electrical and Electronics Engineers, eds. Proceedings of the 2009 International Conference on Field-Programmable Technology (FPT'09). The University of New South Wales, Sydney, Australia, 9-11, Sydney, Australia: IEEE, pp. 372-375.
C. Paiz, et al., “FPGA-in-the-Loop-Simulations for Dynamically Reconfigurable Applications”, Proceedings of the 2009 International Conference on Field-Programmable Technology (FPT'09), IEEE Circuits and Systems Society, IEEE Electron Devices Society, and Institute of Electrical and Electronics Engineers, eds., The University of New South Wales, Sydney, Australia, 9-11, Sydney, Australia: IEEE, 2009, pp.372-375.
Paiz, C., Pohl, C., Radkowski, R., Hagemeyer, J., Porrmann, M., Rückert, U.: FPGA-in-the-Loop-Simulations for Dynamically Reconfigurable Applications. In: IEEE Circuits and Systems Society, IEEE Electron Devices Society, and Institute of Electrical and Electronics Engineers (eds.) Proceedings of the 2009 International Conference on Field-Programmable Technology (FPT'09). p. 372-375. IEEE, The University of New South Wales, Sydney, Australia, 9-11, Sydney, Australia (2009).
Paiz, Carlos, Pohl, Christopher, Radkowski, Rafael, Hagemeyer, Jens, Porrmann, Mario, and Rückert, Ulrich. “FPGA-in-the-Loop-Simulations for Dynamically Reconfigurable Applications”. Proceedings of the 2009 International Conference on Field-Programmable Technology (FPT'09). Ed. IEEE Circuits and Systems Society, IEEE Electron Devices Society, and Institute of Electrical and Electronics Engineers. The University of New South Wales, Sydney, Australia, 9-11, Sydney, Australia: IEEE, 2009. 372-375.
Export

Markieren/ Markierung löschen
Markierte Publikationen

Open Data PUB

Suchen in

Google Scholar
ISBN Suche