Design of 9T SRAM for dynamic voltage supplies by a multiobjective optimization approach

Berge AHKO, Blesken BM, Aunet CS, Rückert U (2010)
In: Electronics, Circuits, and Systems (ICECS), 2010 17th IEEE International Conference on. IEEE Circuits and Systems Society, Institute of Electrical and Electronics Engineers (Eds); Piscataway, NJ: IEEE: 319-322.

Konferenzbeitrag | Veröffentlicht | Englisch
 
Download
Es wurden keine Dateien hochgeladen. Nur Publikationsnachweis!
Autor*in
Berge, A.H.K.O.; Blesken, B.M.; Aunet, C.S.; Rückert, UlrichUniBi
herausgebende Körperschaft
IEEE Circuits and Systems Society; Institute of Electrical and Electronics Engineers
Abstract / Bemerkung
In this paper we present design and optimization results of a 9T SRAM cell in a 65 nm low power technology, which previously has not been investigated for subthreshold operation. The cell is capable of both read and write operations on a supply voltage from 300mV to 1.2V. In our implementation the SRAM cell employs both high and low Vt devices for lower leakage and faster read operation. The current work focuses on operation of the cell as a single port SRAM, although extension to dual port is possible. To optimize and find trade-offs for SRAM performance in both voltage domains we use a multiobjective optimization method, where our design goals were robustness, leakage, operating speed and area. The optimization method provides an approximation of the set of all Pareto optimal designs. Based on this we may quickly select criteria for the objectives and easily optimize the rest of the parameters. Compared to recent publications the 9T cell of this paper shows promise of greatly reducing standby leakage power and good robustness while retaining a similar speed.
Stichworte
low power technology; multiobjective optimization approach; read operations; voltage 300 mV to 1.2 V; optimisation; size 65 nm; subthreshold operation; integrated circuit design; SRAM chips; dynamic voltage supplies; Pareto optimal designs; 9T SRAM cell design; write operations
Erscheinungsjahr
2010
Titel des Konferenzbandes
Electronics, Circuits, and Systems (ICECS), 2010 17th IEEE International Conference on
Seite(n)
319-322
ISBN
9781424481552
Page URI
https://pub.uni-bielefeld.de/record/2286608

Zitieren

Berge AHKO, Blesken BM, Aunet CS, Rückert U. Design of 9T SRAM for dynamic voltage supplies by a multiobjective optimization approach. In: IEEE Circuits and Systems Society, Institute of Electrical and Electronics Engineers, eds. Electronics, Circuits, and Systems (ICECS), 2010 17th IEEE International Conference on. Piscataway, NJ: IEEE; 2010: 319-322.
Berge, A. H. K. O., Blesken, B. M., Aunet, C. S., & Rückert, U. (2010). Design of 9T SRAM for dynamic voltage supplies by a multiobjective optimization approach. In IEEE Circuits and Systems Society & Institute of Electrical and Electronics Engineers (Eds.), Electronics, Circuits, and Systems (ICECS), 2010 17th IEEE International Conference on (pp. 319-322). Piscataway, NJ: IEEE. https://doi.org/10.1109/ICECS.2010.5724517
Berge, A.H.K.O., Blesken, B.M., Aunet, C.S., and Rückert, Ulrich. 2010. “Design of 9T SRAM for dynamic voltage supplies by a multiobjective optimization approach”. In Electronics, Circuits, and Systems (ICECS), 2010 17th IEEE International Conference on, ed. IEEE Circuits and Systems Society and Institute of Electrical and Electronics Engineers, 319-322. Piscataway, NJ: IEEE.
Berge, A. H. K. O., Blesken, B. M., Aunet, C. S., and Rückert, U. (2010). “Design of 9T SRAM for dynamic voltage supplies by a multiobjective optimization approach” in Electronics, Circuits, and Systems (ICECS), 2010 17th IEEE International Conference on, IEEE Circuits and Systems Society, and Institute of Electrical and Electronics Engineers eds. (Piscataway, NJ: IEEE), 319-322.
Berge, A.H.K.O., et al., 2010. Design of 9T SRAM for dynamic voltage supplies by a multiobjective optimization approach. In IEEE Circuits and Systems Society & Institute of Electrical and Electronics Engineers, eds. Electronics, Circuits, and Systems (ICECS), 2010 17th IEEE International Conference on. Piscataway, NJ: IEEE, pp. 319-322.
A.H.K.O. Berge, et al., “Design of 9T SRAM for dynamic voltage supplies by a multiobjective optimization approach”, Electronics, Circuits, and Systems (ICECS), 2010 17th IEEE International Conference on, IEEE Circuits and Systems Society and Institute of Electrical and Electronics Engineers, eds., Piscataway, NJ: IEEE, 2010, pp.319-322.
Berge, A.H.K.O., Blesken, B.M., Aunet, C.S., Rückert, U.: Design of 9T SRAM for dynamic voltage supplies by a multiobjective optimization approach. In: IEEE Circuits and Systems Society and Institute of Electrical and Electronics Engineers (eds.) Electronics, Circuits, and Systems (ICECS), 2010 17th IEEE International Conference on. p. 319-322. IEEE, Piscataway, NJ (2010).
Berge, A.H.K.O., Blesken, B.M., Aunet, C.S., and Rückert, Ulrich. “Design of 9T SRAM for dynamic voltage supplies by a multiobjective optimization approach”. Electronics, Circuits, and Systems (ICECS), 2010 17th IEEE International Conference on. Ed. IEEE Circuits and Systems Society and Institute of Electrical and Electronics Engineers. Piscataway, NJ: IEEE, 2010. 319-322.
Export

Markieren/ Markierung löschen
Markierte Publikationen

Open Data PUB

Suchen in

Google Scholar
ISBN Suche