Fabrication of a microfluidic channel with differently modified surfaces with a two component approach

Bogunovic L, Vosskötter C, Anselmetti D (2014)
Journal of Micromechanics and Microengineering 24(7): 77001.

Zeitschriftenaufsatz | Veröffentlicht | Englisch
 
Download
Es wurden keine Dateien hochgeladen. Nur Publikationsnachweis!
Autor*in
Abstract / Bemerkung
We report on a two-component fabrication technique for microfluidic channels, allowing for different chemical or physical surface modifications of channel walls within one single channel. The two components are made of polydimethylsiloxane and prepared via soft lithography independently. After appropriate pre-treatment with the desired functions, the two parts are bonded together using oxygen plasma and a Fineplacer® lambda system. As a proof of concept, we present the combination of electroosmosis and opposing hydrodynamic flow in a microfluidic channel leading to different velocity presigns of the resulting flow on opposite channel walls, due to different surface modifications. These results indicate an intact Pluronic® F108 surface coating after assembly.
Erscheinungsjahr
2014
Zeitschriftentitel
Journal of Micromechanics and Microengineering
Band
24
Ausgabe
7
Art.-Nr.
77001
ISSN
0960-1317
eISSN
1361-6439
Page URI
https://pub.uni-bielefeld.de/record/2682388

Zitieren

Bogunovic L, Vosskötter C, Anselmetti D. Fabrication of a microfluidic channel with differently modified surfaces with a two component approach. Journal of Micromechanics and Microengineering. 2014;24(7): 77001.
Bogunovic, L., Vosskötter, C., & Anselmetti, D. (2014). Fabrication of a microfluidic channel with differently modified surfaces with a two component approach. Journal of Micromechanics and Microengineering, 24(7), 77001. doi:10.1088/0960-1317/24/7/077001
Bogunovic, L., Vosskötter, C., and Anselmetti, D. (2014). Fabrication of a microfluidic channel with differently modified surfaces with a two component approach. Journal of Micromechanics and Microengineering 24:77001.
Bogunovic, L., Vosskötter, C., & Anselmetti, D., 2014. Fabrication of a microfluidic channel with differently modified surfaces with a two component approach. Journal of Micromechanics and Microengineering, 24(7): 77001.
L. Bogunovic, C. Vosskötter, and D. Anselmetti, “Fabrication of a microfluidic channel with differently modified surfaces with a two component approach”, Journal of Micromechanics and Microengineering, vol. 24, 2014, : 77001.
Bogunovic, L., Vosskötter, C., Anselmetti, D.: Fabrication of a microfluidic channel with differently modified surfaces with a two component approach. Journal of Micromechanics and Microengineering. 24, : 77001 (2014).
Bogunovic, Lukas, Vosskötter, Carina, and Anselmetti, Dario. “Fabrication of a microfluidic channel with differently modified surfaces with a two component approach”. Journal of Micromechanics and Microengineering 24.7 (2014): 77001.

Export

Markieren/ Markierung löschen
Markierte Publikationen

Open Data PUB

Web of Science

Dieser Datensatz im Web of Science®

Suchen in

Google Scholar