All-photoplastic, soft cantilever cassette probe for scanning force microscopy

Genolet G, Despont M, Vettiger P, Anselmetti D, Rooij NF de (2000)
Journal of vacuum science & technology, B 18(2): 617-620.

Zeitschriftenaufsatz | Veröffentlicht | Englisch
 
Download
OA
Autor*in
Genolet, Grégoire; Despont, Michel; Vettiger, Peter; Anselmetti, DarioUniBi ; Rooij, Nico F. de
Abstract / Bemerkung
Multiple single-lever probes for scanning force microscopy arranged in a cassette design and made of a low-stiffness photoplastic material have been developed and successfully tested by imaging DNA molecules. The new concept consists of a column of a one-dimensional array of cantilevers with integrated tips, the first of which is used for imaging and the others are spares in case the first one becomes degraded. When this happens, the lever is mechanically removed from the chip so that the next spare becomes ready for scanning. The probes are fabricated of a photoplastic material, which allows simple batch fabrication and facilitates realization of specific mechanical properties for cantilevers - such as low stiffness - that are very difficult to achieve with classical silicon technology. The batch fabrication process, based on spin coating and subsequent near-ultraviolet exposure and development steps of the photoplastic SU-8, results in well-controlled and uniform mechanical properties of the probes within the same chip, as well as for different chips over a 4 in. wafer. Successful images of soft, condensed-matter samples were taken using these cassette probes, making consecutive readdressing of the same DNA molecule with two different cantilevers possible. Thus, a worn-out cantilever can be replaced by a new fresh one with only small positional adjustments and without any changes in the operating conditions. This ease of operation was provided by the cassette concept and the excellent uniformity of the mechanical cantilever characteristics.
Erscheinungsjahr
2000
Zeitschriftentitel
Journal of vacuum science & technology, B
Band
18
Ausgabe
2
Seite(n)
617-620
ISSN
0734-211X
Page URI
https://pub.uni-bielefeld.de/record/1773222

Zitieren

Genolet G, Despont M, Vettiger P, Anselmetti D, Rooij NF de. All-photoplastic, soft cantilever cassette probe for scanning force microscopy. Journal of vacuum science & technology, B. 2000;18(2):617-620.
Genolet, G., Despont, M., Vettiger, P., Anselmetti, D., & Rooij, N. F. de (2000). All-photoplastic, soft cantilever cassette probe for scanning force microscopy. Journal of vacuum science & technology, B, 18(2), 617-620. doi:10.1116/1.591248
Genolet, G., Despont, M., Vettiger, P., Anselmetti, D., and Rooij, N. F. de (2000). All-photoplastic, soft cantilever cassette probe for scanning force microscopy. Journal of vacuum science & technology, B 18, 617-620.
Genolet, G., et al., 2000. All-photoplastic, soft cantilever cassette probe for scanning force microscopy. Journal of vacuum science & technology, B, 18(2), p 617-620.
G. Genolet, et al., “All-photoplastic, soft cantilever cassette probe for scanning force microscopy”, Journal of vacuum science & technology, B, vol. 18, 2000, pp. 617-620.
Genolet, G., Despont, M., Vettiger, P., Anselmetti, D., Rooij, N.F. de: All-photoplastic, soft cantilever cassette probe for scanning force microscopy. Journal of vacuum science & technology, B. 18, 617-620 (2000).
Genolet, Grégoire, Despont, Michel, Vettiger, Peter, Anselmetti, Dario, and Rooij, Nico F. de. “All-photoplastic, soft cantilever cassette probe for scanning force microscopy”. Journal of vacuum science & technology, B 18.2 (2000): 617-620.
Alle Dateien verfügbar unter der/den folgenden Lizenz(en):
Copyright Statement:
This Item is protected by copyright and/or related rights. [...]
Volltext(e)
Access Level
OA Open Access
Zuletzt Hochgeladen
2019-09-06T08:48:07Z
MD5 Prüfsumme
a5eb28265329b86ca96890710d5b5572

Export

Markieren/ Markierung löschen
Markierte Publikationen

Open Data PUB

Web of Science

Dieser Datensatz im Web of Science®

Suchen in

Google Scholar