Design Optimizations to Improve Placeability of Partial Reconfiguration Modules

Koester M, Luk W, Hagemeyer J, Porrmann M (2009)
In: Proceedings of the International Conference on Design, Automation and Test in Europe (DATE 2009). ACM Press.

Download
Es wurde kein Volltext hochgeladen. Nur Publikationsnachweis!
Konferenzbeitrag | Veröffentlicht | Englisch
Autor
; ; ;
Abstract / Bemerkung
In partially reconfigurable architectures, system components can be dynamically loaded and unloaded allowing resources to be shared over time. This paper focuses on the relation between the design options of partial reconfiguration modules and their placement at run-time. For a set of dynamic system components, we propose a design method that optimizes the feasible positions of the resulting partial reconfiguration modules to minimize position overlaps. We introduce the concept of subregions, which guarantees the parallel execution of a certain number of partial reconfiguration modules for tiled reconfigurable systems. Experimental results, which are based on a Xilinx Virtex-4 implementation, show that at run-time the average number of available positions can be increased up to 6.4 times and the number of placement violations can be reduced up to 60.6%.
Erscheinungsjahr
Titel des Konferenzbandes
Proceedings of the International Conference on Design, Automation and Test in Europe (DATE 2009)
PUB-ID

Zitieren

Koester M, Luk W, Hagemeyer J, Porrmann M. Design Optimizations to Improve Placeability of Partial Reconfiguration Modules. In: Proceedings of the International Conference on Design, Automation and Test in Europe (DATE 2009). ACM Press; 2009.
Koester, M., Luk, W., Hagemeyer, J., & Porrmann, M. (2009). Design Optimizations to Improve Placeability of Partial Reconfiguration Modules. Proceedings of the International Conference on Design, Automation and Test in Europe (DATE 2009). doi:10.1109/date.2009.5090806
Koester, M., Luk, W., Hagemeyer, J., and Porrmann, M. (2009). “Design Optimizations to Improve Placeability of Partial Reconfiguration Modules” in Proceedings of the International Conference on Design, Automation and Test in Europe (DATE 2009) (ACM Press).
Koester, M., et al., 2009. Design Optimizations to Improve Placeability of Partial Reconfiguration Modules. In Proceedings of the International Conference on Design, Automation and Test in Europe (DATE 2009). ACM Press.
M. Koester, et al., “Design Optimizations to Improve Placeability of Partial Reconfiguration Modules”, Proceedings of the International Conference on Design, Automation and Test in Europe (DATE 2009), ACM Press, 2009.
Koester, M., Luk, W., Hagemeyer, J., Porrmann, M.: Design Optimizations to Improve Placeability of Partial Reconfiguration Modules. Proceedings of the International Conference on Design, Automation and Test in Europe (DATE 2009). ACM Press (2009).
Koester, Markus, Luk, Wayne, Hagemeyer, Jens, and Porrmann, Mario. “Design Optimizations to Improve Placeability of Partial Reconfiguration Modules”. Proceedings of the International Conference on Design, Automation and Test in Europe (DATE 2009). ACM Press, 2009.

Export

Markieren/ Markierung löschen
Markierte Publikationen

Open Data PUB

Suchen in

Google Scholar