Young's modulus and tensile strength of CuNi(Mn) thin films on polyimide foils by tensile testing

Macionczyk F, Bruckner W, Pitschte W, Reiss G (1998)
Journal of Materials Research 13(10): 2852-2858.

Download
Es wurde kein Volltext hochgeladen. Nur Publikationsnachweis!
Zeitschriftenaufsatz | Veröffentlicht | Englisch
Autor
; ; ;
Abstract / Bemerkung
Force-strain curves were measured for 1.0 mu m and 1.5 mu m thick Cu0.57Ni0.42Mn0.01 films on 8 mu m thick polyimide foils by tensile testing. By separating the force working on the polyimide foil from that working on the metal-polyimide compound, stress-strain curves for the CuNi(Mn) films were obtained. Young's modulus and tensile strength were determined for as-deposited and annealed [350 degrees C, 1 h, N-2/H-2 (5 vol %) atmosphere] films by this method. Crack propagation starts at the end of the elastic region at 0.2 to 0.7% strain, depending on the film thickness and the thermal treatment. The cracking behavior is described by a steady-state approximation.
Erscheinungsjahr
Zeitschriftentitel
Journal of Materials Research
Band
13
Zeitschriftennummer
10
Seite
2852-2858
ISSN
eISSN
PUB-ID

Zitieren

Macionczyk F, Bruckner W, Pitschte W, Reiss G. Young's modulus and tensile strength of CuNi(Mn) thin films on polyimide foils by tensile testing. Journal of Materials Research. 1998;13(10):2852-2858.
Macionczyk, F., Bruckner, W., Pitschte, W., & Reiss, G. (1998). Young's modulus and tensile strength of CuNi(Mn) thin films on polyimide foils by tensile testing. Journal of Materials Research, 13(10), 2852-2858. doi:10.1557/JMR.1998.0390
Macionczyk, F., Bruckner, W., Pitschte, W., and Reiss, G. (1998). Young's modulus and tensile strength of CuNi(Mn) thin films on polyimide foils by tensile testing. Journal of Materials Research 13, 2852-2858.
Macionczyk, F., et al., 1998. Young's modulus and tensile strength of CuNi(Mn) thin films on polyimide foils by tensile testing. Journal of Materials Research, 13(10), p 2852-2858.
F. Macionczyk, et al., “Young's modulus and tensile strength of CuNi(Mn) thin films on polyimide foils by tensile testing”, Journal of Materials Research, vol. 13, 1998, pp. 2852-2858.
Macionczyk, F., Bruckner, W., Pitschte, W., Reiss, G.: Young's modulus and tensile strength of CuNi(Mn) thin films on polyimide foils by tensile testing. Journal of Materials Research. 13, 2852-2858 (1998).
Macionczyk, F, Bruckner, W, Pitschte, W, and Reiss, Günter. “Young's modulus and tensile strength of CuNi(Mn) thin films on polyimide foils by tensile testing”. Journal of Materials Research 13.10 (1998): 2852-2858.