Design of 9T SRAM for dynamic voltage supplies by a multiobjective optimization approach

Berge AHKO, Blesken BM, Aunet CS, Rückert U (2010)
In: Electronics, Circuits, and Systems (ICECS), 2010 17th IEEE International Conference on. 319-322.

Conference Paper | Published | English

No fulltext has been uploaded

Author
; ; ;
Abstract
In this paper we present design and optimization results of a 9T SRAM cell in a 65 nm low power technology, which previously has not been investigated for subthreshold operation. The cell is capable of both read and write operations on a supply voltage from 300mV to 1.2V. In our implementation the SRAM cell employs both high and low Vt devices for lower leakage and faster read operation. The current work focuses on operation of the cell as a single port SRAM, although extension to dual port is possible. To optimize and find trade-offs for SRAM performance in both voltage domains we use a multiobjective optimization method, where our design goals were robustness, leakage, operating speed and area. The optimization method provides an approximation of the set of all Pareto optimal designs. Based on this we may quickly select criteria for the objectives and easily optimize the rest of the parameters. Compared to recent publications the 9T cell of this paper shows promise of greatly reducing standby leakage power and good robustness while retaining a similar speed.
Publishing Year
PUB-ID

Cite this

Berge AHKO, Blesken BM, Aunet CS, Rückert U. Design of 9T SRAM for dynamic voltage supplies by a multiobjective optimization approach. In: Electronics, Circuits, and Systems (ICECS), 2010 17th IEEE International Conference on. 2010: 319-322.
Berge, A. H. K. O., Blesken, B. M., Aunet, C. S., & Rückert, U. (2010). Design of 9T SRAM for dynamic voltage supplies by a multiobjective optimization approach. Electronics, Circuits, and Systems (ICECS), 2010 17th IEEE International Conference on, 319-322.
Berge, A. H. K. O., Blesken, B. M., Aunet, C. S., and Rückert, U. (2010). “Design of 9T SRAM for dynamic voltage supplies by a multiobjective optimization approach” in Electronics, Circuits, and Systems (ICECS), 2010 17th IEEE International Conference on 319-322.
Berge, A.H.K.O., et al., 2010. Design of 9T SRAM for dynamic voltage supplies by a multiobjective optimization approach. In Electronics, Circuits, and Systems (ICECS), 2010 17th IEEE International Conference on. pp. 319-322.
A.H.K.O. Berge, et al., “Design of 9T SRAM for dynamic voltage supplies by a multiobjective optimization approach”, Electronics, Circuits, and Systems (ICECS), 2010 17th IEEE International Conference on, 2010, pp.319-322.
Berge, A.H.K.O., Blesken, B.M., Aunet, C.S., Rückert, U.: Design of 9T SRAM for dynamic voltage supplies by a multiobjective optimization approach. Electronics, Circuits, and Systems (ICECS), 2010 17th IEEE International Conference on. p. 319-322. (2010).
Berge, A.H.K.O., Blesken, B.M., Aunet, C.S., and Rückert, Ulrich. “Design of 9T SRAM for dynamic voltage supplies by a multiobjective optimization approach”. Electronics, Circuits, and Systems (ICECS), 2010 17th IEEE International Conference on. 2010. 319-322.
This data publication is cited in the following publications:
This publication cites the following data publications:

Export

0 Marked Publications

Open Data PUB

Search this title in

Google Scholar