MMC - a new numerical approach to the kinematics of complex manipulators

Kindermann T, Cruse H (2002)
Mechanism and Machine Theory 37(4): 375-394.

Download
Es wurde kein Volltext hochgeladen. Nur Publikationsnachweis!
Zeitschriftenaufsatz | Veröffentlicht | Englisch
Autor
;
Abstract / Bemerkung
A numerical approach (MMC-model, MMC - mean of multiple computations) is proposed for solving the kinematics of manipulators of nearly arbitrary configuration. It is applicable to serial., parallel and hybrid-chain-manipulators (HCMs). Even changing configurations of the manipulator are possible, because the structural analysis of the current manipulator configuration is done automatically. This approach does not make a strict distinction between the direct and inverse kinematics, but solves both tasks as well as mixed control tasks in a single model. With a slight modification over-constrained problems can also be solved. These properties make the model especially suitable for the simulation of reconfigurable HCMs. The advantages of the MMC-model arise from splitting the structural analysis into two parts. The first, linear part performs the topological analysis without any constraints. Only this part performs the numerical approximation. The second, generally non-linear part adds the constraints and thus allows versatile control of the movement without changing the equations of the approximation procedure in the first part. After a general description of the model we present a hexapod walking system as a complex application of a HCM. (C) 2002 Published by Elsevier Science Ltd.
Erscheinungsjahr
Zeitschriftentitel
Mechanism and Machine Theory
Band
37
Zeitschriftennummer
4
Seite
375-394
ISSN
PUB-ID

Zitieren

Kindermann T, Cruse H. MMC - a new numerical approach to the kinematics of complex manipulators. Mechanism and Machine Theory. 2002;37(4):375-394.
Kindermann, T., & Cruse, H. (2002). MMC - a new numerical approach to the kinematics of complex manipulators. Mechanism and Machine Theory, 37(4), 375-394. doi:10.1016/S0094-114X(01)00080-5
Kindermann, T., and Cruse, H. (2002). MMC - a new numerical approach to the kinematics of complex manipulators. Mechanism and Machine Theory 37, 375-394.
Kindermann, T., & Cruse, H., 2002. MMC - a new numerical approach to the kinematics of complex manipulators. Mechanism and Machine Theory, 37(4), p 375-394.
T. Kindermann and H. Cruse, “MMC - a new numerical approach to the kinematics of complex manipulators”, Mechanism and Machine Theory, vol. 37, 2002, pp. 375-394.
Kindermann, T., Cruse, H.: MMC - a new numerical approach to the kinematics of complex manipulators. Mechanism and Machine Theory. 37, 375-394 (2002).
Kindermann, Thomas, and Cruse, Holk. “MMC - a new numerical approach to the kinematics of complex manipulators”. Mechanism and Machine Theory 37.4 (2002): 375-394.